Benks GlassWarrior Sapphire Screen Protector For iPhone 17 Pro Max
Thanks to Benks for sending me the Benks GlassWarrior Sapphire Screen Protector For iPhone 17 Pro Max ahead of the launch of the iPhone 17 Pro Max.
Previously, for my iPhone 16 Pro Max, I was also using the Benks GlassWarrior Sapphire Screen Protector For iPhone 16 Pro Max.
You can get Benks GlassWarrior Sapphire Screen Protector from Shopee and Lazada for S$36.
Applying the screen protector this time is much easier because I have experience. My iPhone 17 Pro Max is a brand-new set with the factory screen protector on; hence, there is no dust on it.
This time, the foam pad doesn’t have a cutout for the iPhone 17 Pro Max’s Plateau. So it does wobble a little. But not a deal breaker.
After placing the screen protector kit and aligning the word “UP” with the top of your iPhone, you need to press down on the four edges of the kit. Once that is done, you can slowly pull out the tab that says (1).
Once the (1) tab is pulled out, press the black strip at the bottom to let the air out. You can also take this chance to press down on various parts of the kit.
Press down on the (2) tab once you are satisfied with the result, and the kit will pop up. Then press down on the (3) tab, and the other end of the kit will pop up. You can now remove the kit. Bubbles are to be expected, but you can use the cloth to press against the screen and push it away.
It takes about 5 minutes or so to remove all the bubbles. It will disappear the next day if you choose not to do it.
